Frosty Autumn Crown

If I were a queen, I might have a selection of crowns like one would have a selection of shoes based on occasion and weather. A warm summer night concert? Maybe it would be the strappy high heeled pearl white sandals and the diamond and emerald tiara.
A frosty autumn evening ribbon cutting ceremony? Hm.....perhaps the fawn colored suede boots and this loverly thing.

 Not quite winter, but ready to usher it in.

I began with the a template which is available in the Winter Crowns Kit from the amazing Alpha Stamps.

I traced and cut three pieces from the template. my front paper, a thin piece of cardboard (for the center-to give the crown strength) and a white inside piece just to give the back of the crown a more finished look.
Next, I cut a generous length of ribbon, about 30 inches, centered it on the cardboard and glued it on with some strong white glue. (I used Aleene's Fast Grab Glue) I let that dry thoroughly.

 Using the same glue, I glued both the front piece and the back piece on.

While they were still damp, I gently worked a curve into the piece by carefully bending the entire thing section by section, making sure that I didn't crease the paper or bend it too forcefully creating a fold or bubble in the paper. It takes a little time, but it's worth it and if you go slowly enough, you won't buckle your inside paper.
When you can get it to a point that it's flexible enough for you to tie it on something head shaped (I tried my husband, but a) he didn't want to wear a girly crown and b) his head was too big.) In the end, I found a nice pottery jar with an average head circumference and tied the crown around the jar and let it dry there.

After the crown dried, I glued some Gold Tinsel
to the top edge of the crown and used some clips to hold it in place until the glue set up. Clothes pins or paper clips would work as well.

Since a large portion of the center of the crown is going to be a medallion cut from the Vintage French Ads Collage Sheet, I marked (with a pencil) where the collage image was going to go, and applied the tinsel only where it would show on either side of the image.
I also glued tinsel to the bottom edge of the crown.

Before I glued the image to the crown, I used a white Sharpie poster paint marker and painted out the center image. I glittered up a snowflake from the Chipboard Snowflake Shape Set, glued it to the center, applied some Mixed Size Ivory Flat-Back Pearls and piped some Stickles in Diamond and Gilded Gold onto the design.
After it dried, I carefully curved it and glued it on to the crown.
Next came the big leaves...two different colors, so pretty! Called Golden Night Wired Leaves.

 Then the snowflakes on the leaves. The larger of the two is called White Glittered Snowflake Embellishments and the smaller ones are Tiny White Snowflake Buttons that I cut the shank off of so they would glue flat.
I cut a couple dozen leaves off of the Stitched Leaf Ribbon-Silver and glued them on around the bottom edge of the crown.
I added some Pear-Shaped Pearl Stick Pins-Pearl and Pear-Shaped Pearl Stick Pins-Gold to the top of the crown (I love the drama!) and glued in some more silver leaves for extra pizazz. A few dots of Stickles here and there look a bit like frost to finish it up.
A pretty frosty crown for a chilly fall evening.
Now, what handbag should I use..................
For links to all the supplies from Alpha Stamps, click HERE.

Supplies
Chipboard Snowflake Shape Set
Golden Night Wired Leaves
Mixed Size Ivory Flat-Back Pearls
Vintage French Ads Collage Sheet
Crown Template
State Chic Cream Scrapbook Paper
Pear Shaped Pearl Stick Pins-White
Pear Shaped Pearl Stick ins-Gold
Tinsel Gold
Tiny White Snowflake Buttons
Stitched Leaf Ribbon-Silver
Stickles: Gold Gilded, Diamond
Ivory 7/8 Inch Satin Ribbon (substitution)
White Glittered Snowflake Embellishments
Twinklets Diamond Dust

Thanksgiving Stagger Tags

Hello all! Lora here with some fun Thanksgiving tags from the fabulous Gypsy Soul Laser Cuts folks. I love fall colors and that's what inspired these cute tags. They are called Stagger Tags (small) and the set is three cute tags ranging from 2.5 x 4.5 (largest) to 2.5x3.5 (smallest). Great tags to put on a package, tie to a napkin ring or even use as a place tag on the table or attached to the back of a chair.

The fall-colored napkins are so pretty this year, I decided to use them instead of cardstock for the background of my tags.

 The first thing I did was give the tags a rough coat of white gesso. (you can use white paint as well) Since you are going to peel the napkins apart and they are transparent, it's good to have a white background as the colors will really pop.

After the gesso dried, I peeled the napkin apart, making sure that I got all three ply separated. Nearly all napkins are 3-ply. Make sure you have got the backing (the two separate ply of white layers) away from the 'picture' part of the napkin. If you leave a ply underneath the printed picture, the picture will not adhere properly and will eventually peel off.
And that would be sad.
After I separated all three ply (I always save the plain white to use for clean and etc...) I put of coat of matte medium on the tag (I used Liquitex Matte Medium) and gently laid the napkin over the tag, making sure there were no air bubbles. Folds are okay, but air bubbles will tear and you don't want that!

After placing the picture, I gave the piece a top coat of matte medium, making sure the whole surface is covered then set it aside to dry and worked on the other two. Do not try to tear the edges off at this point...let it all dry or you can tear the napkin right off of the tag.
Also sad.
Because here is what you do and it is so much easier and looks so much better!

After the tag has dried completely, use a fine grit sanding block or an emery board and sand off the extra bits of napkin. It looks so much tidier than tearing and you then have a nice edge to ink on. Easy, fast and purdy.
And now you have a beautiful surface to embellish that was simple and fun. I like the idea of having other options to use as a background surface and some of the designs on napkins these days are so nice.
One note: Make sure you get a quality product. I test all my napkins beforehand by applying a little matte medium to the surface to make sure they don't bleed or run. It does sometimes happen. I usually always buy the napkins on sale but have learned that some manufacturers do not use a stable dye. I can imagine what would happen if you wiped something really wet off of your face.....what a mess.
My favorite companies are Michel Design Works and Caspari, but there are others that are equally good.

Another fun thing I did paint the Miniature Book Plates Shape Set pieces I used on the tags to look a little like wood.

I just painted the bookplates with a mixture of orange and red, let them dry and then dry-brushed some sap green lightly across the top. The red underneath makes the sap green appear brown and simulate (loosely) wood grain.
Add ribbons, metal findings and erudite (not really) sayings and there you have it.  Thanksgiving tags.
Now go make fun stuff!

Thank you for stopping by!

SUPPLIES
Stagger Tags (small)
Miniature Book Plates Shape Set


Additional supplies
Napkins
Matte Medium
Ribbon
Beads
Metal findings
Stickles Glitter Glue