Tuesday, July 2, 2019

A Sugar Skull House for Halloween

I know it's only June, but I am all about Halloween lately, and most everybody knows how much I love doing houses, so here is a Sugar Skull in a house.
With bats.
And some scary tree bits.
Here it is lit up with glowing eyes.
 And unlit, but still looks pretty cool in the daylight.
  I started out with the Mini House Room Box 4x4 Open. I took away the attic floor to make room for the Sugar Skull 1.
I laid the skull on top of the large center piece and marked where I wanted to drill holes for my glowing eyes.
I drilled the holes to the size of the tea light flames, NOT the whole tea light. I'm going to glue the body of the tea light in place on the back of the house, but we'll do that in a later step. For now, I dry fit the tea light to make sure the flame fits through the holes I drilled.
I cut papers for the main body of the house, back, front and sides (outside only). I glued the sides and the roof on, painted the inside of the house walls, ceiling and floor and then glued all the papers on.
 Next, I painted almost everything else black. Sugar Skull, Creepy Tree (I used bits and  pieces of the 8-inch Creepy Tree and the 5-inch Creepy Tree) Chipboard Bats Set (you can get them HERE) and the ridge ornament, which is the Chipboard Fleur Border. (Get it HERE)
I shingled the roof and painted most of it brown, adding a few rows of black to accent the pattern. I glued the ridge ornament on as well. You can see some of the roof and ridge in the picture below. I apologize for not getting a WIP shot. I was all into the groove and forgot.
when all the glue and paint dried, I added the trees and the bats on the back. I used black double stick foam tape to stick the trees on and mounted the bats on wires and then glued them on to the tree and added some black roses to pretty up the joined bits. I got the roses from Alpha Stamps, the same place I got the bats and the ridge ornament and the Dresden trim, which I glued on to the base of the ridge ornament and the gable edge of the house front.
Last but not least, I added some corks to the sugar skull and glued into place and turned on the lights!
That's a good start on Halloween!

SUPPLIES:
Mini House Room Box 4x4 Open
Sugar Skull 1
Creepy Tree (8inch)
Creepy Tree 5inch
Chipboard Shingles-Pointed

From Alpha Stamps:
Chipboard Bat Set
Black Zig Zag Dresden Borders
Chipboard Fleur Border

Additional:
BoBunny Double Dot Vintage Chiffon
Graphic 45 Olde Curiosity Shoppe Genuine Article
Two tea lights
Black Paint
Thank you for stopping by!


1 comment:

Pandora said...

This is awesome! Love the glowing eyes, the two-tone shingles and the trees with bats.