It's the day after Christmas....

And all through the house, we are laying about reading and playing with our new iPads.  I have very happy, toasty warm feet. The rest of me is happy and toasted as well.
Did I say toasted?

I hope everyone had a wonderful Christmas!

The Witches Deck The Halls!

Hello everyone! Hope you all had a wonderful Thanksgiving! Here I am again makin' something fun for Alpha Stamps! It's Witches Decking the Halls, woohoo! It's also very timely as we have had about 6 inches of snow in the last 24 hours.
The witches have decked out their house for Christmas! It's wintery and snowy outside and very festive inside.

The ladies have the tree all decorated and stockings hung, ready for Santa.

They are dressed in their finery, have their festive hats on and have their brooms all spiffed up, ready for their midnight rounds and then it's off to the Christmas Cookie Exchange!

I began with the Large Haunted House Shadowbox.
I glued the piece together starting from the inside, making sure all the 'walls' were plumb.

I applied gesso and then a coat of white paint to the areas that weren't getting paper.

While this was drying, I painted all my window trims black and built my window boxes out of scrap chipboard. The three windows I chose were all different widths, so each box was measured to fit over each one.

I painted them green and added Baroque Dresden Borders-Black to the fronts of the boxes.

I measured and cut all the papers I planned using for the outside and inside the main box, and the papers for the front. And I decided that the front of the house needed a tower, so I made a template and cut out a thin cardboard 'tower roof' that fit over the top two right-hand side windows.

I covered my tower roof with paper and glued it carefully over the existing window holes in the front piece, making sure everything lined up well.
I glued on all of my window frames and any Dresden trim I wanted to use on the outside of my house and under the windows (setting aside the door for the moment), put some greenery in my window boxes and glued them under the windows as well.
I set the front aside for a bit and played around with trimming out the inside rooms.
I cut a piece from a Small Glassine Envelope and fitted it to the front top of the door, giving the impression of frosted glass.

Brooms trimmed up with a little holiday cheer, Christmas tree decorated and a red sparkly bow makes the kitty in the top center window look festive. A little snow and sparkle on the outside of the house....Okay, everybody in their places for a photo op!

MERRY CHRISTMAS and HAPPY HOLIDAYS!

For a link to all the wonderful supplies, click HERE!

Supplies
Large Haunted House Shadowbox
Mini Holly Leaf Garland
1/4 inch Red Holly Berry Stems
Wired Pine Needle Stems
Retro Bottle Brush Tree Set
Tiny Mixed Size Flat Back Pearls
G45 Winter Wonderland 12x12 Patterns and Solids Pad
G45 Olde Curiosity Shoppe Optical Oddities Scrapbook Paper (flip side)
Saucy Witches Collage Sheet
Halloween Dress Up Half Sheet (black cat)
Deck The Halls Collage Sheet
Miniature Rustic Brooms
Fluffy Winter Snow
Stickles, Diamond, Lime Green, Christmas Red, Waterfall and Firefly
2017 Christmas Ornaments Ribbon Set
White Pearl Mix In Tin
3D Bronze Tea Time Teapot Charm
Chipboard Snowflake Shape Set
Small Glassine Envelopes

Thank you for stopping by!

Winteer Trees Shadowbox

Hello all. Lora Mahaffey here taking my turn for the awesome sauce that is Gypsy Soul Laser Cuts!
When we are in this busy time of year I sometimes want to do something that has a repetitive nature. Seeing a pattern can be relaxing and calming.
Except if we're talking a zig-zag of spiders.
Maybe not that.
Anyway, I find making something that is repetitive kind of soothing. I'm sure I'm projecting here, but maybe in all the holiday chaos, looking at something that repeats itself might be that way for you too.
So here is a little serenity and calm in the midst of the bustle that we call the holidays.
Or you can just say it's four trees in a House Room Box - 4 Cubbies.
I'm good with that!

A view of the back....

I began by cutting my papers for the sides and back and also for the back of the four cubbies. I glued the house together and set it aside to dry.
While it was drying I put a coat of gesso on the Chipboard Shingles-Pointed and the 1 7/8 inch Snowflakes (which are coming soon).

After the snowflakes dried, I gave them a coat of matte medium and while they were wet, I sprinkled glitter on them.
A lot of glitter....

If you  put a saucer or a bowl underneath what you're glittering, you can reuse the glitter. I found these little ceramic dishes at a junk shop. It says 'United Airlines' on the bottom, so I guess these were the plates they used to serve meals on way back when.

While waiting for all that glitter to dry, I glued the shingles to the roof. It took four rows of shingles to do the whole roof.

After the glue dries, it's really easy to trim the shingles down to the width that you want them with a big pair of scissors. I cut mine down to about 1 3/4 inches wide.
At this point, my house was dry so I glued on all the papers I cut for the house and inked the edges a bit.
I wanted my snowflakes to sit about half an inch away from the back of each cubbie, so I measured cut four pieces of foam . painted them white and glued them to the back of each snowflake. I glued them into each cubbie, making sure they all lined up up with each other.

I didn't have any trees that were tiny enough to fit in the cubbies, but I had a bunch of small bottle brush trees that I had no other plans for, so I measured how tall I wanted them to be (about an 1 1/2) and cut their little tops off so the the tops became the 'new' tree.
I added some little pearls, some tiny little snowflakes and some more glitter and glued the trees in front of the large snowflakes.

I trimmed edges, added snow and (more) glitter to the roof.......

And a painted candlestick holder for as a pedestal.

I don't know about you, but I feel pretty calm and happy right now.
Happy Holidays!

SUPPLIES:
Chipboard Shingles-Pointed
House Room Box 4 Cubbies
1 7/8 inch Snowflakes (coming soon)

The Candlestick Holder, Retro Bottle Brush Trees, pearls (White Pearl Mixed Tin), Stickles glitter (in Diamond) and 5mm Thin Snowflakes (on the trees) came from Alpha Stamps.
All the papers were from Graphic 45's lovely Winter Wonderland .

Thank you for visiting!

Frosty Autumn Crown

If I were a queen, I might have a selection of crowns like one would have a selection of shoes based on occasion and weather. A warm summer night concert? Maybe it would be the strappy high heeled pearl white sandals and the diamond and emerald tiara.
A frosty autumn evening ribbon cutting ceremony? Hm.....perhaps the fawn colored suede boots and this loverly thing.

 Not quite winter, but ready to usher it in.

I began with the a template which is available in the Winter Crowns Kit from the amazing Alpha Stamps.

I traced and cut three pieces from the template. my front paper, a thin piece of cardboard (for the center-to give the crown strength) and a white inside piece just to give the back of the crown a more finished look.
Next, I cut a generous length of ribbon, about 30 inches, centered it on the cardboard and glued it on with some strong white glue. (I used Aleene's Fast Grab Glue) I let that dry thoroughly.

 Using the same glue, I glued both the front piece and the back piece on.

While they were still damp, I gently worked a curve into the piece by carefully bending the entire thing section by section, making sure that I didn't crease the paper or bend it too forcefully creating a fold or bubble in the paper. It takes a little time, but it's worth it and if you go slowly enough, you won't buckle your inside paper.
When you can get it to a point that it's flexible enough for you to tie it on something head shaped (I tried my husband, but a) he didn't want to wear a girly crown and b) his head was too big.) In the end, I found a nice pottery jar with an average head circumference and tied the crown around the jar and let it dry there.

After the crown dried, I glued some Gold Tinsel
to the top edge of the crown and used some clips to hold it in place until the glue set up. Clothes pins or paper clips would work as well.

Since a large portion of the center of the crown is going to be a medallion cut from the Vintage French Ads Collage Sheet, I marked (with a pencil) where the collage image was going to go, and applied the tinsel only where it would show on either side of the image.
I also glued tinsel to the bottom edge of the crown.

Before I glued the image to the crown, I used a white Sharpie poster paint marker and painted out the center image. I glittered up a snowflake from the Chipboard Snowflake Shape Set, glued it to the center, applied some Mixed Size Ivory Flat-Back Pearls and piped some Stickles in Diamond and Gilded Gold onto the design.
After it dried, I carefully curved it and glued it on to the crown.
Next came the big leaves...two different colors, so pretty! Called Golden Night Wired Leaves.

 Then the snowflakes on the leaves. The larger of the two is called White Glittered Snowflake Embellishments and the smaller ones are Tiny White Snowflake Buttons that I cut the shank off of so they would glue flat.
I cut a couple dozen leaves off of the Stitched Leaf Ribbon-Silver and glued them on around the bottom edge of the crown.
I added some Pear-Shaped Pearl Stick Pins-Pearl and Pear-Shaped Pearl Stick Pins-Gold to the top of the crown (I love the drama!) and glued in some more silver leaves for extra pizazz. A few dots of Stickles here and there look a bit like frost to finish it up.
A pretty frosty crown for a chilly fall evening.
Now, what handbag should I use..................
For links to all the supplies from Alpha Stamps, click HERE.

Supplies
Chipboard Snowflake Shape Set
Golden Night Wired Leaves
Mixed Size Ivory Flat-Back Pearls
Vintage French Ads Collage Sheet
Crown Template
State Chic Cream Scrapbook Paper
Pear Shaped Pearl Stick Pins-White
Pear Shaped Pearl Stick ins-Gold
Tinsel Gold
Tiny White Snowflake Buttons
Stitched Leaf Ribbon-Silver
Stickles: Gold Gilded, Diamond
Ivory 7/8 Inch Satin Ribbon (substitution)
White Glittered Snowflake Embellishments
Twinklets Diamond Dust