A Trio of Tags

Hello everybody, it's my first gig as an official design team member for Gypsy Soul Laser Cuts (gslcuts.com ) and I'm thrilled to be part of the team!
Today I'm keeping it fairly simple with this pretty trio of tags......

I started out with the Chipboard Decorative Tags Large and the Chipboard Decorative Tags X Large. I used the tags as templates for the paper I chose and traced enough for both sides of the x large tags and for one side of the large tags. I brushed a light coat of matte medium on the paper and another, heavier coat for each tag and stuck 'em together.

After they all dried I inked the edges with gold and I glued the smaller tags (large tags) on to the bigger ones (x large tags) making sure the smaller tags were centered and that the papers were complimentary to each other.

Whilst they were drying, I painted the smaller three frames from the Filigree Frames Shapes Set a lovely shade of black.
I love the fun stencil 'opposite' the paint made when I lifted the frames up for drying. Hmmmm, that might be a fun project for another day!

Make sure you lift the frame up off of whatever you are painting them on and set them on a piece of plastic or wax paper to dry. Otherwise, the paint may act as glue and you'll be peeling the poor things off of your scrap cardboard. Not that I've EVER done that.


After everything is dry, I cut narrow strips of paper borders and glued them to the center of the smaller tags and then glued the frames on the tags. Once that is done, it's just a matter of embellishing and adding bits and pieces until you are happy with your results.

The papers I used were all from the Graphic 45 'Olde Curiosity Shoppe' 8x8 paper pad, which is one of my favorites. I also used a fine black marker to make dots and lines around the bits I wanted a little extra shading on. You can see that really well in the picture below;

I strung the tags on some pretty green velvet ribbon, threaded a big wooden bead through the ribbon and added a bit of glue on the bead to secure it. A little brass filigree flower and a tiny crystal added to the center for a bit of sparkle and glued on to the ribbon where it goes through the center hole of the tag completes the pieces.

SUPPLIES
Filigree Frames Shapes Set
Chipboard Decorative Tags Large
Chipboard Decorative Tags X Large


Additional Supplies
Graphic 45 'Olde Curiosity Shoppe' 8x8 paper pad
Black acrylic paint
Black permanent marker
Green velvet ribbon
Filigree brass flower stamping


Thank you for taking a look!